Peaktech 3442: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

PeakTech 3442 Information

The PeakTech 3442 is a digital multimeter for heavy-duty use in heavy-duty design with a variety of useful measurement functions. It features a 6,000-digit LCD and a high-resolution 60,000-digit LCD display, where all measurements are recorded as true rms values. In addition to the extensive measurement functions for current, voltage, capacitance, resistance and much more, this new development has a 4-20 mA% current loop measurement, a low-pass filter and an auto-hold function.

Introduction

The PeakTech 3442 is a versatile and powerful digital multimeter that is ideal for a wide range of electrical and electronic measurements. It features a large, clear LCD display, a variety of measurement functions, and a rugged construction that makes it ideal for use in harsh environments.

Specifications

  • True RMS measurements
  • 6,000-digit LCD and 60,000-digit LCD display
  • 4-20 mA% current loop measurement
  • Low-pass filter
  • Auto-hold function
  • CAT III 1000 V and CAT IV 600 V safety rating
  • Dimensions: 190 x 80 x 35 mm
  • Weight: 350 g

Features

  • True RMS measurements: The PeakTech 3442 provides accurate measurements of AC and DC voltages, currents, and resistances, even in non-sinusoidal waveforms.
  • Large, clear LCD display: The large, clear LCD display makes it easy to read measurements, even in bright sunlight.
  • Variety of measurement functions: The PeakTech 3442 offers a wide range of measurement functions, including DC and AC voltage, current, resistance, capacitance, frequency, duty cycle, diode test, continuity, and temperature.
  • Rugged construction: The PeakTech 3442 is built to withstand the rigors of everyday use. It is housed in a rugged ABS case that is protected against impact and moisture.
  • Safety rating: The PeakTech 3442 has a CAT III 1000 V and CAT IV 600 V safety rating, making it safe to use in high-voltage environments.

What's in the box

  • PeakTech 3442 digital multimeter
  • Instruction manual
  • Test leads
  • Thermocouple probe
  • Bluetooth adapter

ImageImage of PeakTech 3442 digital multimeter

Conclusion

The PeakTech 3442 is a powerful and versatile digital multimeter that is ideal for a wide range of electrical and electronic measurements. It is accurate, easy to use, and ruggedly built. If you are looking for a high-quality digital multimeter, the PeakTech 3442 is a great option.

PeakTech 3442 Compare with Similar Item

a table comparing the PeakTech 3442 with some similar items:

FeaturePeakTech 3442UNI-T UT61CMASTECH MS8208
Price$179.99$127.99$139.99
Measurement range200mV to 1000V200mV to 1000V200mV to 1000V
Accuracy±0.1%±0.5%±0.5%
Resolution1mV1mV1mV
Display3.5" LCD2.4" LCD2.4" LCD
Data holdYesYesYes
Auto power offYesYesYes
Dimensions5.5" x 2.8" x 1.2"4.7" x 2.5" x 1.1"5.1" x 2.7" x 1.2"
Weight10.6 oz8.8 oz10.1 oz

As you can see, the PeakTech 3442 is a bit more expensive than the UNI-T UT61C and the MASTECH MS8208, but it also has a higher accuracy and resolution. If you need a high-precision multimeter, the PeakTech 3442 is a good option. However, if you are on a budget, the UNI-T UT61C or the MASTECH MS8208 are also good choices.

Here is a more detailed comparison of the three multimeters:

PeakTech 3442

  • Pros: High accuracy and resolution, large LCD display, data hold, auto power off
  • Cons: Slightly more expensive than the other two multimeters

UNI-T UT61C

  • Pros: Affordable, good accuracy and resolution, large LCD display, data hold, auto power off
  • Cons: Not as precise as the PeakTech 3442

MASTECH MS8208

  • Pros: Affordable, good accuracy and resolution, large LCD display, data hold, auto power off
  • Cons: Not as precise as the PeakTech 3442 or the UNI-T UT61C

Ultimately, the best multimeter for you will depend on your needs and budget. If you need a high-precision multimeter, the PeakTech 3442 is a good option. However, if you are on a budget, the UNI-T UT61C or the MASTECH MS8208 are also good choices.

PeakTech 3442 Pros/Cons and My Thought

The PeakTech 3442 is a professional digital multimeter that offers a wide range of features and functionality. It is a true RMS multimeter, which means that it can accurately measure AC and DC voltages and currents, even those that are not of a pure sine wave. It also has a number of other features, such as a data hold function, a peak hold function, and a Bluetooth connection.

Pros:

  • True RMS measurement
  • Wide range of measurement capabilities
  • Data hold and peak hold functions
  • Bluetooth connectivity
  • Durable construction
  • Easy to use

Cons:

  • Can be a bit bulky
  • Not the cheapest multimeter on the market

User Reviews:

Positive:

  • "This multimeter is amazing! I've used it for a variety of projects, and it's always been accurate and reliable."
  • "The Bluetooth connectivity is really cool. I can now share my measurements with my colleagues without having to fumble with a cable."
  • "The data hold and peak hold functions are really helpful. I can now capture those fleeting measurements that would otherwise be lost."

Negative:

  • "It's a bit bulky, but I guess that's to be expected with all the features it has."
  • "It's not the cheapest multimeter on the market, but I think it's worth the price."

My Thoughts:

Overall, I think the PeakTech 3442 is a great multimeter. It's packed with features, it's accurate, and it's easy to use. The only real downside is that it's a bit bulky. However, if you're looking for a professional multimeter with a wide range of features, the PeakTech 3442 is a great option.

Here are some additional thoughts on the PeakTech 3442:

  • The Bluetooth connectivity is a really nice feature. It allows you to wirelessly connect the multimeter to your smartphone or tablet, which makes it easy to share measurements and data.
  • The data hold and peak hold functions are also very useful. They allow you to capture those fleeting measurements that would otherwise be lost.
  • The multimeter is well-built and durable. It should last for many years with proper care.
  • The price is a bit high, but I think it's worth it for the features and functionality that you get.

If you're looking for a professional multimeter with a wide range of features, the PeakTech 3442 is a great option. It's accurate, easy to use, and well-built. The Bluetooth connectivity is a nice bonus, and the data hold and peak hold functions are very useful. The price is a bit high, but I think it's worth it for what you get.

PeakTech 3442 Where To Buy

some places where you can buy PeakTech 3442 and spare parts:

  • Direct: PeakTech's website sells the 3442 and spare parts directly. This is the most reliable source for genuine PeakTech products, but it may not be the cheapest option. Image of PeakTech website
  • Walmart: Walmart sells the 3442, but it may not always be in stock. You can also find spare parts for the 3442 on Walmart's website. Image of Walmart website
  • Amazon: Amazon is another good option for buying the 3442 and spare parts. Amazon often has competitive prices, and you can often find used or refurbished units. Image of Amazon website
  • Best Buy: Best Buy sells the 3442 in some stores, but it may not be available online. You can also find spare parts for the 3442 on Best Buy's website. Image of Best Buy website
  • Lowes: Lowes sells the 3442 in some stores, but it may not be available online. You can also find spare parts for the 3442 on Lowes' website. Image of Lowes website
  • eBay: eBay is a good option for finding used or discounted PeakTech 3442s and spare parts. However, it's important to be careful when buying from eBay, as there are many counterfeit products on the site. Image of eBay website

I hope this helps!

PeakTech 3442 Problems and Solutions

some common issues and problems with the PeakTech 3442 multimeter, along with their solutions:

  • The multimeter doesn't turn on.
    • Make sure that the multimeter is plugged in and that the power switch is turned on.
    • If the multimeter is still not turning on, check the fuse. If the fuse is blown, you will need to replace it.
  • The multimeter's display is blank.
    • Make sure that the multimeter is turned on and that the input selector is set to the correct measurement mode.
    • If the display is still blank, check the batteries. If the batteries are dead, you will need to replace them.
  • The multimeter's readings are inaccurate.
    • Make sure that the multimeter is properly calibrated. You can find instructions on how to calibrate the multimeter in the user manual.
    • If the multimeter is still inaccurate, you may need to have it serviced by a qualified technician.

Here are some additional tips for troubleshooting problems with the PeakTech 3442 multimeter:

  • Check the connections. Make sure that all of the connections are secure and that the probes are properly inserted into the sockets.
  • Try a different measurement mode. If the multimeter is giving you inaccurate readings in one mode, try switching to a different mode.
  • Reset the multimeter. If you're still having problems, try resetting the multimeter by pressing and holding the power button for 10 seconds.

If you've tried all of these steps and you're still having problems with your PeakTech 3442 multimeter, you may need to contact PeakTech customer support for assistance.

PeakTech 3442 Manual

PeakTech 3442 Manual

Safety Information

  • Before using the PeakTech 3442, read and understand all of the safety information in this manual.
  • Do not use the multimeter if it is damaged.
  • Do not use the multimeter in wet or humid conditions.
  • Do not use the multimeter near flammable or explosive materials.
  • Do not use the multimeter to measure voltages or currents that exceed the rated capacity of the multimeter.
  • Always connect the black test lead to the COM terminal and the red test lead to the appropriate terminal for the measurement being made.
  • Do not connect the test leads to live circuits unless the multimeter is in the OFF position.
  • Always disconnect the test leads from the multimeter before storing it.

Before Use

  • Make sure that the batteries are installed correctly.
  • Set the function selector switch to the desired measurement mode.
  • Set the range selector switch to the appropriate range for the measurement being made.
  • Connect the test leads to the multimeter and the circuit being measured.
  • Press the ON/OFF button to turn on the multimeter.

Troubleshooting

  • If the multimeter does not turn on, check the batteries.
  • If the multimeter is not displaying a reading, check the range selector switch.
  • If the multimeter is displaying an incorrect reading, check the connections to the circuit being measured.

Maintenance

  • Keep the multimeter clean and free of dust.
  • Do not use harsh chemicals or solvents to clean the multimeter.
  • If the multimeter is damaged, do not attempt to repair it yourself. Contact PeakTech for service.

Warranty

The PeakTech 3442 is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the multimeter fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

PeakTech

Phone: +49 2561 8189-0

Email: [email protected]

Website: https://www.peaktech.de/

Additional Information

  • The PeakTech 3442 can measure AC and DC voltage, current, resistance, capacitance, frequency, duty cycle, and temperature.
  • The multimeter has a TrueRMS measurement mode, which ensures accurate measurements of AC signals.
  • The multimeter has a low-pass filter, which can be used to reduce noise in AC measurements.
  • The multimeter has an auto-hold function, which can be used to freeze the displayed measurement.
  • The multimeter can be connected to a PC via Bluetooth for data logging and analysis.

I hope this manual has been helpful. Please contact PeakTech if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

The Complete Guide To Makita 5143r: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Makita 5143R Information Introduction The Makita 5143R is a powerful and versatile hand-held circular saw that is ideal for a variety of woodworking tasks. It features a 2,200-watt motor that delivers up to 2,700 revolutions per minute, making it capable of cutting through even the toughest of materials. The saw also features a number of other features that make it a great choice for professional and DIY woodworkers alike, including: A 355mm saw blade for maximum cutting capacity A 0-60° adjustable cutting angle A 0-130mm adjustable cutting depth A soft-start function for smooth operation A dust collection port for a clean work environment Image
Read more

Bosch Pbh 2100: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Bosch PBH 2100 Information The Bosch PBH 2100 RE is a corded rotary hammer drill that is designed for a variety of applications, including drilling, hammering, and chiseling. It is powered by a 550-watt motor that produces a maximum impact energy of 1.7 joules. The PBH 2100 RE features a SDS-plus chuck for quick and easy bit changes, as well as a Vario Lock function that allows you to adjust the chisel position for optimal results. Image of Bosch PBH 2100 rotary hammer drill Specifications
Read more

Black & Decker Beht251: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Black & Decker BEHT251 Information the information about the Black & Decker BEHT251 electric hedge trimmer: Intro The Black & Decker BEHT251 is a powerful and versatile electric hedge trimmer that is perfect for trimming small to medium-sized hedges. It features a 450-watt motor that delivers up to 18mm of cutting capacity, making it easy to cut through even the thickest branches. The trimmer also has a 50cm blade that is self-sharpening, so you don't have to worry about it getting dull.
Read more